The vibration feeder consists of feeding tank, vibration exciter, spring bearing and transmission device. To enhance the service life of vibratory feeder, the following maintenance must be done.
1. When vibration feeder feeds materials continuously, it can be installed with 10 degrees 15 degrees downward inclined. For viscous materials and materials with large moisture content, it can be installed with 15 degrees downward inclined.
2. Before the empty test, all the bolts should be strengthened once, especially the anchor bolts of vibrating motor. Because it runs continuously for 3-5 hours, it should be tightened again.
3. The stability of amplitude, current and noise should be checked regularly when feeding, and if there is any abnormal the machine should be stopped in time.
4. Motor bearings are lubricated once every 2 months, and should be added once a month in hot season.
Purchasing high performance vibratory feeder you can consider Liming Heavy Industry. Just dial 0086-371-86162511 to get more information as soon as possible.